This is a test store. Any orders placed on this site will NOT be processed or fulfilled.

Meat Grinders & Choppers

Use Meat Choppers to Make Fresh Meats in Your Commercial Kitchen

  • Hobart – 4822 – Meat Chopper

    • 1 1/2 H.P.. motor (11⁄4 H.P. for 230/50/1).
    • 12-20 lbs. per minute capacity.
    • Ideal for “On Demand” meat chopping for processing fresh, boned meat.
    • Can be fed at a rapid pace with continuous chopping action and no crushing or mashing of the meat
    • All parts which contact food are easily accessible and readily removable for convenient cleaning without the use of tools.
    • Stainless steel housing with stainless steel trim and legs.
    • Lbs per Minute: 16 lbs

  • Hobart – 4812 – Meat Chopper

    • 1⁄2 H.P. motor.
    • Manual ON/OFF switch.
    • 6 foot cord & plug.
    • 174 RPM transmission.
    • Stainless steel housing.
    • Stainless steel legs with rubber feet.
    • Spiral-fluted chopping end.
    • Plastic feed stomper.
    • Stainless steel housing with stainless steel trim and legs.
    • Lbs per Minute: 8 lbs

  • Hobart – 4732 – Meat Chopper

    • 3 H.P. motor.
    • Compact design.
    • Steel gears.
    • Oil bath transmission.
    • Double lip seal.
    • 14 gauge stainless steel pan.
    • Metallic gray epoxy
    • Lbs per Minute: 35-40 lbs

  • Hobart – 4146 – Meat Grinder

    • 5 H.P. motor
    • Magnetic starter.
    • 215 RPM transmission.
    • No. 46 wide-mouth grinding end.
    • 14 gauge tinned steel feed pan.
    • Waterproof junction box.
    • Stainless steel finish.
    • Multiple leg length options.
    • Grinding end.
    • High back.
    • Stainless steel deflector.
    • Plastic feed stomper.
    • Wrench.
    • Lbs per Minute: 60-65 lbs
    • Motor: 5 HP

  • Sirman – TC 8 Vegas – Meat Grinders

    • Anodized aluminium body and ABS shockproof sides.
    • Ventilated motor.
    • Oil-bath gear box.
    • Ground tempered helical gears.
    • Bright finished mouth and feeding worm.
    • S/S plates and knives.
    • Compartment for knives and plates.
    • Reverse (optional).
    • CE version with: IP 54 protection rated controls and NVR device.
    • Net weight(kg): 10kg
    • Gross weight(kg): 12kg

    31,900.0036,685.00

    Sirman – TC 8 Vegas – Meat Grinders

    31,900.0036,685.00 Add to cart
    Get Quote
  • Sirman – TC 32 Nevada – Meat Grinders

    • AISI 304 stainless steel construction.
    • Powerful IP 55 insulated and fan-cooled motors for continuous use.
    • Endless screw motor-reducer running in an oil-bath enables a long service life.
    • Motor-reducer equipped with a double seal for long, trouble-free service.
    • Convenient head interlock mechanism (CE versions).
    • Stainless steel mincing head carefully designed for high yeld production.
    • Feed tray designed with square neck for outstanding performance.
    • Feed tray provided with safety interlock (CE versions).
    • Stainless steel IP 67 protected controls with reverse.
    • Interlock protection for more than 8 mm holes plates.
    • Partial or total Unger system mincing head.
    • Plexiglass feed tray lid.
    • Patty-forming attachment FORMAT M.
    • Net weight(kg): 50kg
    • Gross weight(kg): 72kg

  • Sirman – TC 22 Nevada – Meat Grinders

    • AISI 304 stainless steel construction.
    • Powerful IP 55 insulated and fan-cooled motors for continuous use.
    • Endless screw motor-reducer running in an oil-bath enables a long service life.
    • Motor-reducer equipped with a double seal for long, trouble-free service.
    • Convenient head interlock mechanism (CE versions).
    • Stainless steel mincing head carefully designed for high yeld production.
    • Feed tray designed with square neck for outstanding performance.
    • Feed tray provided with safety interlock (CE versions).
    • Stainless steel IP 67 protected controls with reverse.
    • Net weight(kg): 36kg
    • Gross weight(kg): 39kg

  • Sirman – TC 42 Montana Y12 – Meat Grinders

    • AISI 304 stainless steel construction.
    • Can be sprayed.
    • Oil-bath, water protected gear box.
    • Completely made from AISI 304 stainless steel.
    • Designed for high performance.
    • Machine works perfectly even if product is processed two or more times.
    • Hourly output: 1.100 Kg (actual) (42)
    • Hourly output: 3500 kg (possible).
    • Unprocessed meat inside grinding set at working cycle end: 50-90 g.
    • Stainless steel drive pin.
    • Exclusive, patented plate and ring nut detection system (CE).
    • Tempered steel worm pin.
    • Grinding set is quickly disassembled of faster cleaning and sanitation.
    • Square feeding “neck” allows for faster processing cycles.
    • Large 563x 900 x h 120 mm feeding hopper with safety microswitch.
    • IP 67 water protected stainless steel controls with reverse (on CE versions).
    • Net weight(kg): 112kg
    • Gross weight(kg): 137kg

  • Sirman – TC 32 Montana Hp4 Y12 – Meat Grinders

    • AISI 304 stainless steel construction.
    • Can be sprayed.
    • Oil-bath, water protected gear box.
    • Completely made from AISI 304 stainless steel.
    • Designed for high performance.
    • Machine works perfectly even if product is processed two or more times.
    • Hourly output: 3500 kg (possible).
    • Unprocessed meat inside grinding set at working cycle end: 50-90 g.
    • Stainless steel drive pin.
    • Exclusive, patented plate and ring nut detection system (CE).
    • Tempered steel worm pin.
    • Grinding set is quickly disassembled of faster cleaning and sanitation.
    • Square feeding “neck” allows for faster processing cycles.
    • Large 563x 900 x h 120 mm feeding hopper with safety micro switch.
    • IP 67 water protected stainless steel controls with reverse (on CE versions).
    • Net weight(kg): 90kg
    • Gross weight(kg): 118kg

  • Sirman – TC 22 E – Meat Grinders

    • Made from diecasted polished aluminium.
    • Ventilated motor.
    • Oil-bath gear box.
    • Cast iron head and feeding worm (Aisi 304 stainless steel on demand).
    • S/S plates and knives.
    • CE version: 24 volt controls and NVR device.
    • Optional: Reverse.
    • Net weight(kg): 21kg
    • Gross weight(kg): 23kg

    59,400.0068,310.00

    Sirman – TC 22 E – Meat Grinders

    59,400.0068,310.00 Add to cart
    Get Quote
  • Sirman – TC 12 E – Meat Grinders

    • Made from diecasted polished aluminium.
    • Ventilated motor.
    • Oil-bath gear box.
    • Cast iron head and feeding worm (Aisi 304 stainless steel on demand).
    • S/S plates and knives.
    • CE version: 24 volt controls and NVR device.
    • Optional: Reverse.
    • Net weight(kg): 18kg
    • Gross weight(kg): 20kg

    48,875.0056,206.00

    Sirman – TC 12 E – Meat Grinders

    48,875.0056,206.00 Add to cart
    Get Quote
  • Sirman – TC 12 Denver Fx – Meat Grinders

    • Anodized aluminium body and ABS shockproof sides.
    • Ventilated motor.
    • Oil-bath gear box.
    • Ground tempered helical gears.
    • Bright finished mouth and feeding worm.
    • S/S plates and knives.
    • Compartment for knives and plates.
    • Reverse standard.
    • CE version with: IP 54 protection rated controls and NVR device.
    • Net weight(kg): 19kg
    • Gross weight(kg): 22.5kg

  • Sirman – TC 12 Denver – Meat Grinders

    • Anodized aluminium body and ABS shockproof sides.
    • Ventilated motor.
    • Oil-bath gear box.
    • Ground tempered helical gears.
    • Bright finished mouth and feeding worm.
    • S/S plates and knives.
    • Compartment for knives and plates.
    • Reverse standard.
    • CE version with: IP 54 protection rated controls and NVR device.
    • Net weight(kg): 19kg
    • Gross weight(kg): 22.5kg

  • Sirman – TC 22 Dakota Fx – Meat Grinders

    • Easy to carry thanks to its sides handles.
    • Anodized aluminium body and ABS shockproof sides.
    • Ventilated motor.
    • Oil-bath gear box.
    • Ground tempered helical gears.
    • Easy to remove AISI 304 S/S mincing mouth.
    • S/S plates and knives.
    • Standard reverse.
    • CE version: 24 volt controls and NVR device.
    • Net weight(kg): 26kg
    • Gross weight(kg): 36kg

  • Sirman – TC 22 Dakota – Meat Grinders

    • Easy to carry thanks to its sides handles.
    • Anodized aluminum body and ABS shockproof sides.
    • Ventilated motor.
    • Oil-bath gear box.
    • Ground tempered helical gears.
    • Easy to remove AISI 304 S/S mincing mouth.
    • S/S plates and knives.
    • Standard reverse.
    • CE version: 24 volt controls and NVR device.
    • Net weight(kg): 26kg
    • Gross weight(kg): 36kg

  • Sirman – TC 12 Dakota Fx – Meat Grinders

    • Easy to carry thanks to its sides handles.
    • Anodized aluminum body and ABS shockproof sides.
    • Ventilated motor.
    • Oil-bath gear box.
    • Ground tempered helical gears.
    • Easy to remove AISI 304 S/S mincing mouth.
    • S/S plates and knives.
    • Standard reverse.
    • CE version: 24 volt controls and NVR device.
    • Net weight(kg): 24kg
    • Gross weight(kg): 34kg

  • Sirman – TC 12 Dakota – Meat Grinders

    • Easy to carry thanks to its sides handles.
    • Anodized aluminium body and ABS shockproof sides.
    • Ventilated motor.
    • Oil-bath gear box.
    • Ground tempered helical gears.
    • Easy to remove AISI 304 S/S mincing mouth.
    • S/S plates and knives.
    • Standard reverse.
    • CE version: 24 volt controls and NVR device.
    • Net weight(kg): 24kg
    • Gross weight(kg): 34kg

  • Sirman – TC 32 Colorado – Meat Grinders

    • AISI 304 stainless steel construction.
    • Powerful IP 55 insulated and fan-cooled motors for continuous use.
    • Endless screw motor-reducer running in an oil-bath enables a long service life.
    • Motor-reducer equipped with a double seal for long, trouble-free service.
    • Convenient, no-tools head lock mechanism.
    • Stainless steel mincing head carefully designed for high yeld production, completely removable for ease of cleaning.
    • IP 54 protected, 24 V controls.
    • Optional: Partial or total Unger system mincing head, Plexiglass feed tray lid, Stainless steel IP 67 protected controls.
    • Net weight(kg): 39kg
    • Gross weight(kg): 41kg

  • Sirman – TC 22 Colorado – Meat Grinders

    • AISI 304 stainless steel construction.
    • Powerful IP 55 insulated and fan-cooled motors for continuous use.
    • Endless screw motor-reducer running in an oil-bath enables a long service life.
    • Motor-reducer equipped with a double seal for long, trouble-free service.
    • Convenient, no-tools head lock mechanism.
    • Stainless steel mincing head carefully designed for high yeld production, completely removable for ease of cleaning.
    • IP 54 protected, 24 V controls.
    • Optional: Partial or total Unger system mincing head, Plexiglass feed tray lid, Stainless steel IP 67 protected controls.
    • Net weight(kg): 32kg
    • Gross weight(kg): 35kg

  • Sirman – TC 32 California – Meat Grinders

    • Heavy-duty meat grinder with high capacity, suitable for all kitchens.
    • AISI 304 stainless steel construction.
    • Large 410x610x76 mm feeding tray with safety microswitch.
    • Powerful IP55 insulated and cooled motors for continues use.
    • Endless screw motor-reducer an oil-bath enables a long service life.
    • Reducer equipped with a double seal for long, trouble-free service.
    • Head can be locked in with no tools.
    • Stainless steel head with high output capacity, completely removable for cleaning.
    • Feed tray provided with safety interlock CE versions.
    • Stainless steel IP 67 protected, 24 V controls.
    • Partial or total Unger mincing head.
    • Net weight(kg): 55kg
    • Gross weight(kg): 70kg

  • Sirman – TC 32 Buffalo S – Meat Grinders

    • Compact heavy duty mincer.
    • Exclusive design high output grinding head.
    • Available both table top or floor standing. (many optional available).
    • Stainless steel head with quick bayonette fitting.
    • Square feeding neck. (High output also with pre-minced meat).
    • Waterproof gear box with double sealing system.
    • Ventilated motor for continuous operation.
    • IP 67 protection rated controls with reverse.
    • Optional: Overload protection, Larger trays: “gigante” or “super”, Short, medium, long legs, Receiving tray holder, Half/total unger system, Stuffer kit, Splash guard, Safety device for Ø> 8 mm plates.
    • Net weight(kg): 70kg
    • Gross weight(kg): 85kg

  • Sirman – TC 32 Buffalo – Meat Grinders

    • Compact heavy duty mincer.
    • Exclusive design high output grinding head.
    • Available both table top or floor standing. (many optional available).
    • Stainless steel head with quick bayonette fitting.
    • Square feeding neck. (High output also with pre-minced meat).
    • Waterproof gear box with double sealing system.
    • Ventilated motor for continuous operation.
    • IP 67 protection rated controls with reverse.
    • Optional: Overload protection, Larger trays: “gigante” or “super”, Short, medium, long legs, Receiving tray holder, Half/total unger system, Stuffer kit, Splash guard, Safety device for Ø> 8 mm plates.
    • Net weight(kg): 64kg
    • Gross weight(kg): 76kg

  • Sirman – TC 32 Barcellona – Meat Grinders

    • Heavy duty compact mincer.
    • IP 54 protection rate, 24 Volt controls, reverse (CE version).
    • Sealed oil-bath gear box.
    • Waterproof gear box with double sealing system.
    • Aisi 304 S/S mouth and feeding worm.
    • Quick and sturdy head locking system.(patented on 32 version)
    • 22 version available also with round feeding neck.
    • High efficiency ventilated motors for continuous operation.
    • Thermal protection on single phase motors.
    • Optional: Total/half unger system, Patty former, Stuffer kit, Oversize tray, Medium legs, Safety device for Ø> 8 mm plates.
    • Compartment for knives and plates.
    • Easy cleaning.
    • Silent running, powerful and reliable.
    • Net weight(kg): 44kg
    • Gross weight(kg): 54kg

  • Sirman – TC 22 Barcellona – Meat Grinders

    • Heavy duty compact mincer.
    • IP 54 protection rate, 24 Volt controls, reverse (CE version).
    • Sealed oil-bath gear box.
    • Waterproof gear box with double sealing system.
    • A 304 S/S mouth and feeding worm.
    • 22 version available also with round feeding neck.
    • High efficiency ventilated motors for continuous operation.
    • Thermal protection on single phase motors.
    • Optional: Total/half Unger system, Patty former, Stuffer kit, Oversize tray, Medium legs, Safety device for Ø> 8 mm plates.
    • Compartment for knives and plates.
    • Easy cleaning.
    • Silent running, powerful and reliable.
    • Net weight(kg): 31kg
    • Gross weight(kg): 41kg

Menu

×

Get Quote